Utilization of red mud as catalyst in conversion of waste oil and waste plastics to fuel

The aim of this study was to investigate the possibilities of using a by-product (red mud) from alumina production as a catalyst for recovery of waste. The conversion of waste mineral oil (WMO) and waste mineral oil/municipal waste plastic (WMO/MWP) blends over red mud (RM), a commercial hydrocracking catalyst (silica–alumina), and a commercial hydrotreating catalyst (Ni–Mo/alumina) to fuel has been studied. The effect of the catalyst and the temperature on the product distribution (gas, liquid, and wax) and the properties of liquid products were investigated. In the case of hydrotreatment of WMO, the liquids obtained over RM at both 400° and 425°C had larger amounts of low-boiling hydrocarbons than that of thermal or catalytic treatment with hydrotreating catalyst. Gas chromatography and nuclear magnetic resonance analysis of the liquid products showed that RM had hydrogenation and cracking activity in hydrotreatment of WMO. In coprocessing of WMO with municipal waste plastics, temperature had an important effect as well as the amount of MWP in the blend and the catalyst type. The hydrocracking at 400°C produced no liquid product. In hydrocracking at 425°C, the product distribution varied with catalyst type and MWP amount. The commercial hydrocracking catalyst had more cracking ability in the conversion of WMO/MWP to liquid and gas fuel than RM. In the case of hydrocracking over RM, the largest amount of liquid having satisfactory quality was obtained only from the blend containing 20% MWP.     

Regulation of nuclear radiation exposures in India

India has a long-term program of wide spread applications of nuclear radiations and radioactive sources for peaceful applications in medicine, industry, agriculture and research and is already having several thousand places in the country where such sources are being routinely used. These places are mostly outside the Department of Atomic Energy (DAE) installations. DAE supplies such sources. The most important application of nuclear energy in DAE is in electricity generation through nuclear power plants. Fourteen such plants are operating and many new plants are at various stages of construction. In view of the above mentioned wide spread applications, Indian parliament through an Act, called Atomic Energy Act, 1964 created an autonomous body called Atomic Energy Regulatory Board (AERB) with comprehensive authority and powers. This Board issues codes, guides, manuals, etc., to regulate such installations so as to ensure safe use of such sources and personnel engaged in such installations and environment receives radiation exposures within the upper bounds prescribed by them. Periodic reports are submitted to AERB to demonstrate compliance of its directives. Health, Safety and Environment Group of Bhabha Atomic Research Centres, Mumbai carries out necessary surveillance and monitoring of all installations of the DAE on a routine basis and also periodic inspections of other installations using radiation sources. Some of the nuclear fuel cycle plants like nuclear power plants and fuel reprocessing involve large radioactive source inventories and have potential of accidental release of radioactivity into the environment, an Environmental Surveillance Laboratory (ESL) is set up at each such site much before the facility goes into operation. These ESL's collect baseline data and monitor the environment throughout the life of the facilities including the decommissioning stage. The data is provided to AERB and is available to members of the public. In addition, a multi-tier system of AERB permissions is in place to ensure that all aspects of safety have been considered before permission to operate is granted. The stages where permission of AERB is essential are site selection, design data, and several stages during construction and operation. The details required by AERB include provision for treatment and storage of radioactive waste, de-commissioning procedures and provision of costs. In addition to AERB, nuclear power plants have to comply with the requirements of Ministry of Environment and Forests and get their clearance. This is given on the basis of Environmental Impact Assessment Report which should satisfy the authorities that no ecological damage will be caused and the facility will not have adverse effect on the environment. In addition, the State Pollution Control Board where the facility is to be located has to permit the site of the plant for its proposed discharges into the environment. It is largely due to the above comprehensive regulatory controls that none of the plants in India had any accident during the last 34 decades of operation. The type of measurements carried out by the ESL's and results from a few typical ESL's will be presented.     

The impact of handpump corrosion on water quality in rural areas of West African sub-region

Water, even in its natural environment, contains some level of impurities. Water is nearly a universal solvent. It contains dissolved solids and gases, and hosts a number of micro-organisms. The exploitation of groundwater by means of boreholes for supplying small user groups and rural communities with water has been widely applied in certain parts of the world for several decades. In recent years this practice has spread all over the globe, and hundred of thousands of boreholes have beendrilled to tap low-yield aquifers. It is evident that such boreholes require pumps for lifting thewater. In developing countries these are usually handpumps, butsolar as well as other systems with submersible pumps are also used, depending upon the energy sources available and the financial means of the beneficiaries. This article gives a general overview of groundwater quality with regard to itsphysico-chemical composition. The results presented originatefrom the experience gained from handpump equipped boreholes within the UNICEF through German Centre for Technical EducationTransfer executed inter-regional UNDP-Handpumps Project inWest African Regions. Particular attention is paid to presenting corrosion onthe water quality of wells in terms of iron concentrationand other parameters. Furthermore, the corrosion attack ongalvanised iron, the effect of biofilms on the corrosionrate, and the difference between internal and externalcorrosion of rising mains are shown.     

Copper and zinc speciation in the solution of a soil-sludge mixture

Only a small fraction of the transition metals content in sludge-amended soils is soluble, and yet this fraction is a major contributor to the mobility and bioavailability of the metals. The chemical species of zinc (Zn) and copper (Cu) in the soluble fractions of soil-sludge mixtures were characterized with respect to their charge, molecular weight, and stoichiometry using ion exchange resin and gel chromatography procedures. The change in the metals' species with time after sludge application was followed for 100 d. Copper in the water extracts of the sludge-sand mixtures was found almost exclusively in low molecular weight (below 1000 Da) complexes. Higher molecular weight (around 2500 Da) dissolved organic carbon (DOC) was present in the extracts as well, but this DOC fraction exhibited little complexation. Copper was present in the extracts mainly as negatively charged species throughout the incubation period, and zinc tended to form zwitter ions. As incubation progressed, the relative content of positively charged Zn in solution increased. Complexation capacity of DOC in sludge water extract, extrapolated to infinite dilution, was 8.75 mM Ca g(-1) DOC. When the complexation capacity of the extract is near saturation, a mean Cu-DOC complex can be defined. It consists of 1.9 Cu atoms attached to DOC species containing 5.6 C atoms. Thus, the organic Cu complexes consist primarily of about two Cu ions attached to DOC species containing only five or six C atoms. Amino acids and small peptides or polycarboxylic acids, such as citric acid, thus may be important complexing agents of the metal.     

Effect of water extract of the bark of Buchanania lanzan linn. on behaviour and chromatophores of a fresh water fish,Labeo rohita

Fish exposed to 150 ppm and 250 ppm doses saparately, showed eratic swimming with hyper-excitability, spiralling, convulsion and mortality. However at 350 ppm dose fish became lethargic and steady at the bottom of aquarium. This behaviour appears to be due to sedative effects of fish implicating the phychoactive nature of the plant B. Ianzan. At 150 ppm to 350 ppm doses, fish scale changed from reticulate to punctate chromatophores; and treated fish when transferred to fresh water, were slowly regained to normal behaviour after 96 h exposure. Hence doses regaining from 150 ppm to 350 ppm is considered to be psychoative in nature. In higher doses 450 ppm and 550 ppm fish could survive only 76 h and 4.30 h respectively and then died indicating toxicity of plant for the said doses. It is found that scale present on its body is most suitable test system for the study of psychoactivity and toxicity of plant extracts on fish, Labeo rohita.     

Behavior of a surface applied radionuclide and a dye tracer in structured and repacked soil monoliths

There has been increasing evidence in recent years about the impact of soil structure on vadose zone hydrology and the distribution of surface applied chemical substances. We have carried out a combined dye and radionuclide tracer study on two monoliths from the same location, one structured and one repacked, as part of an ongoing study to investigate the link between preferential flow, leaching of surface applied substances and their distribution within the soil.A tracer solution containing 1300 Bq/L (58)Co and 0.31 micromol/L Sulforhodamine B (SB) was added with roughly constant irrigation during a period of three weeks. The dye served as a tracer for water movement within the soil and thus allowed linkage of the radiotracer ((58)Co) with the flow pattern. Both were monitored in the outflow and measured within profile sections after monolith disassembly. Preferential flow in the structured monolith promoted the bypass and transport of both tracers, although transport was impeded at depths greater than 30 cm by compacted soil and reduced hydraulic conductivity. Eighty four percent of radiocobalt and 8% of SB were found in the upper 4 cm of the structured monolith. The homogenized monolith, on the other hand, showed mostly chromatographic infiltration and a more efficient soil filtering capacity with 91% of radiocobalt and 20% SB residing in the upper 4 cm. Furthermore no tracer was found in the outflow of the homogenized monolith during normal to high irrigation or at greater depth within the monolith. We have related flow characteristics and sorption of radiotracers by quantifying dye distributions and radionuclide activities throughout the profiles. Activities within the flow paths are up to 20-times higher than those measured in the soil matrix, and a fraction of radiocobalt follows the dye tracer in spite of cobalt's low mobility. The dye can thus be used to trace radionuclide distribution within the soil block.     

Sorption of polycyclic aromatic compounds to humic and fulvic acid HPLC column materials

Two different humic acids (HA) and a fulvic acid (FA) were chemically immobilized to a high performance liquid chromatography (HPLC) silica column material. The immobilization was performed by binding amino groups in HA/FA to the free aldehyde group in glutardialdehyde attached to the silica gel. The HPLC column materials were compared with a blank column material made by applying the same procedure but without immobilizing HA or FA. Also, a column was made by binding carbonyl groups in HA to amino groups attached to the silica gel. The humic substances were selected to secure appropriate variation of their structural features. The retention factors of 45 polycyclic aromatic compounds (PAC) to the four columns were determined by HPLC. The advantage of the technique is a large number of compounds can easily be studied. The binding procedure does not appear to cause a drastic selection between the HA molecules. The k' values obtained for the two Aldrich HA columns agree in general reasonably. The retention or sorption of the compounds increased with the size of the PAC and the number of lipophilic substituents, but decreased when polar substituents were present. The PAC retention was much stronger to the two HA columns than to the FA and blank column, both for hydrophobic polycyclic aromatic hydrocarbons (PAH) and the polar PAC. Other factors impacting the PAC binding may be specific interactions with HA and the ionic strength of the aqueous phase. The technique has been applied to do direct determinations of Koc.